This is a tiny DC gear motor intended for use at 6 V, though in general, these kinds of motors can run at voltages slightly above and below this nominal voltage. The micro N20 motor can rotate in both clockwise and counter-clockwise directions. It features a 3 mm D-shaped shaft on which a 3 mm shaft hub can easily be mounted to attach stuff like a wheel, fan blade, etc. Alternatively, a 3 mm shaft wheel can be attached to it directly. To mount the motor, a micro metal gear motor bracket can be used. The motor has two terminals, (Motor +), and (Motor -).
SKU: 2839 | |||||
No-load speed @ 6V: | 600 | RPM | |||
No-load current @ 6V: | 50 | mA | |||
Resistivity: | 9 | ohm | |||
Stall Torque @ 6V: | 24.3 | N-mm | 3.45 | Ounce-in | |
Stall Current @ 6V: | 607 | mA | |||
Stall Power @ 6V: | 3.64 | W |