As a precaution to COVID-19, in-store purchase is NOT available but you may place your order online then pickup your order.
Shipping of online order is unaffected. Delivery may be delayed due to carrier backlog. Sorry for the inconvenience.

This item is archived from our catalog and no longer for sale. This page is available as a reference only.

Pololu 120:1 Plastic Gearmotor Offset Output

This 120:1 gearbox with brushed DC motor has a low-current motor and provides power and speed that is comparable to an RC servo at a fraction of the cost. At 6 V, it has a free-run speed of 85 RPM and a stall torque of approximately 75 oz-in. Though the product picture shows two gearmotors, this product is for a single motor. The compact size of this low-current motor makes this unit an attractive choice for small robot designs. The recommended operating voltage range for this motor is 3 – 12 V.

This is a lower-torque, higher-speed version of the 228:1 plastic gearmotor offset output. At 6 V, the gearbox and motor provide approximately 75 oz-in of torque and 85 RPM. The free-running current is 70 mA, and the stall current is 800 mA. The gearbox is protected by a built-in safety clutch that will typically slip before gear teeth can shear.

This gearmotor comes pre-assembled, with the gears fully enclosed. There are built-in mounting holes, and the output shaft is 6 mm long and 7 mm in diameter with two sides flattened. The output shaft is along the same axis as the motor shaft, but offset; we also sell a version of this gearmotor with a 90° output shaft.