Two pin JST connector to a 2.1x 5.5mm barrel jack, 6.25 inch long jumper cable. We use this cable to adapt from a wall power supply to a relatively small, SMD JST connector. We found that many of the SMD connectors used for battery charging were too large or were not capable of through-putting the current we wanted for faster charging. This setup, with a SMD JST connector and wall power supply, can handle up to 2A!
We Also Recommend
Break Away Male Headers (Straight 40-pin)
Premium Splittable Jumper Wire (40 Pins M/F 20cm)
Premium Splittable Jumper Wire (40 Pins M/M 10cm)
Premium Splittable Jumper Wire (40 Pins F/F 10cm)