Our new SPT100 System is perfect for cameras or sensors up to 10 oz. As you can see from the pictures, this unit can be mounted upright or mounted upside down. If you are needing more than 90° of movement for the pan, you can order servos from us pre-modified for this on the Hitec servo pages. We highly recommend either the HS-485HB for applications up to 6 oz or the HS-645MG for applications up to 10 oz. Any standard size servos will work. Unit comes unassembled with full instructions.
Note: Servos and camera are not included and must be purchased separately.
- Weight (no servos): 1.5 oz.
- Tray Swing: 135°
- Servos: 2 Standard Size (Hitec or Futaba)
- Maximum Payload Weight: 10 ounces
- Position: Hanging, Upright or Sideways
We Also Recommend
Mini Pan-Tilt Kit (without Micro Servos)
Actobotics Standard Gripper Kit A (Horizontal)
Holder for Arduino / BeagleBone / Raspberry Pi, Breadboard (Black Holder Plate, Hardware, Rubber Stands Only)
HC-SR04 Ultrasonic Sensor Holder/Mount (Blue)