Each cell outputs a nominal 3.7V at 6000mAh! Comes terminated with a standard 2-pin JST-PH connector - 2mm spacing between pins. These batteries require special charging. Do not attempt to charge these with anything but a specialized Lithium Polymer charger.
Battery includes built-in protection against over voltage, over current, and minimum voltage.
Note: Be careful with the JST connectors. They can stick in pretty good and tugging on them can damage the connector.
Dimensions: 93 x 59 x 8 mm (±1 mm)
- Excellent long-term self-discharge rates (<8% per month)
- Robust power source under extreme conditions (-25 to 60C)
We Also Recommend
Chip Quik No-Clean T3 Solder Paste 50g (SAC305)
Arduino Nano 33 BLE Sense Rev2
HC-SR04 Ultrasonic Sensor Mounting Bracket