This high-torque hybrid stepping motor has a 1.8° step angle (200 steps/revolution). Each phase draws 1 A at 5.7 V, allowing for a holding torque of 4 kg-cm (55 oz-in). The motor has six color-coded wires terminated with bare leads that allow it to be controlled by both unipolar and bipolar stepper motor drivers. When used with a unipolar stepper motor driver, all six leads are used. When used with a bipolar stepper motor driver, the center-tap yellow and white wires can be left disconnected (the red-blue pair gives access to one coil and the black-green pair gives access to the other coil). We recommend using it as a bipolar stepper motor.
Our 1/4″ universal mounting hub can be used to mount objects on the stepper motor’s 1/4″-diameter output shaft.
- Size: 56.4 mm square × 41 mm, not including the shaft (NEMA 23)
- Weight: 450 g (16 oz)
- Shaft diameter: 1/4″ (6.35 mm) “D”
- Steps per revolution: 200
- Current rating: 1 A per coil
- Voltage rating: 5.7 V
- Resistance: 5.7 Ohm per coil
- Holding torque: 4 kg-cm (55 oz-in)
- Inductance: 5.4 mH per coil
- Lead length: 12 in
More specifications are available in the datasheet (50k pdf).
We Also Recommend
Adafruit NeoPixel Digital RGBW LED Strip - White PCB 60 LED/m (1 meter)
Adafruit NeoPixel Digital RGB LED Strip - White 60 LED - WHITE(1 meter)
Short Headers Kit for Feather - 12-pin + 16-pin Female Headers
Adafruit NeoPXL8 FeatherWing for Feather M4 - 8 x DMA NeoPixels!