The Hakko FS-100 paste re-tins oxidized soldering iron tips and is 100% Lead-Free. The flux does not contain Diammonium phosphate and does not leave a corrosive residue. (Conforms to JIS-Z-3197 6.6.1 test method.)
Depending on the severity of the oxidation and/or corrosion, the FS-100 will help rejuvenate very oxidized and/or corroded soldering iron tips back to useful life.
For optimum performance, use the FS-100 paste in conjunction with the Hakko FT-700 tip polisher for increased oxide removal.
|1. The suitable temperature for cleaning is around 350℃.|
|2. Tin the tip with the chemical paste FS-100 (to remove oxides).|
|3. Wipe out the chemical paste FS-100 left on the tip with a cleaning sponge or cleaning wire.|
|4. Feed solder to the tip and see whether or not solder wets on it.|
|5. Repeat the above steps of 2 to 4 until solder wets on the tip surface.|
|6. If solder wets on the tip surface again, feed enough solder to cover the tip to prevent oxidation at the end.|
We Also Recommend
Pololu Tic T834 USB Multi-Interface Stepper Motor Controller (Connectors Soldered)
Pololu Tic T500 USB Multi-Interface Stepper Motor Controller (Connectors Soldered)
Hook-up Wire Set 26AWG Solid Core (6 colours, 10m / 30ft each)