Recommended
Panasonic Battery C (2-pack)
1918-PAN-7816074
In Stock
$1.49 CAD
Lithium-Ion Polymer (LiPo) Battery (3.7V 6000mAh)
1435-PRT-9901011
In Stock
$34.99 CAD
Lithium-Ion Polymer (LiPo) Battery (3.7V 110mAh)
0939-PRT-9922771
In Stock
$5.99 CAD
Coin Cell Battery Holder - 20mm (PTH)
2419-PRT-1100104
In Stock
$2.09 CAD

Tenergy Smart Universal Charger for NiMH/NiCD Battery Packs: 6v - 12v

Tenergy Smart Universal Charger for NiMH/NiCD Battery Packs: 6v - 12v
Tenergy Smart Universal Charger for NiMH/NiCD Battery Packs: 6v - 12v Tenergy Smart Universal Charger for NiMH/NiCD Battery Packs: 6v - 12v Tenergy Smart Universal Charger for NiMH/NiCD Battery Packs: 6v - 12v Tenergy Smart Universal Charger for NiMH/NiCD Battery Packs: 6v - 12v
Product ID: 1804-TEN
Location: 7813072
Manufacturer: Tenergy
Mfr Parts No.: 01025
Availability: In Stock
Price: $29.09 CAD
Sale: $14.59 CAD
(Save 50%)

Features and Benefits

  • Best Charger for charging all RC Car, RC Airplane and Airsoft battery packs 6V, 7.2V, 8.4V, 9.6V, 10.8V and 12V
  • Patent pending watchdog technology provides maximum safety
  • Universal for any NiMH /NiCd battery packs 6V - 12V (5-10 Cells Pack)
  • Fast charger with current switch to select either 1A or 2A
  • Charging Current 1A for battery packs with capacity from 1000mAh -1800mAh
  • Charging Current 2A for battery packs with capacity above 2000mAh. For 3000mAh pack, charging time is apprx. 1.5 hours
  • Smart Charger with automatic voltage detection
  • Temperature sensor to protect battery pack from over heating
  • Use pulse and negative pulse technology to avoid battery overheating during fast charging, optimized for battery pack's cycle life
  • Red LED will be on during charging
  • Automatically charging ending with negative delta V
  • Worldwide usage with 120-240V AC

 

Accessories Included

  • 1 standard Tamiya connector with Temperature Sensor.
  • 1 adapter from standard Tamiya to Mini Tamiya.
  • 1 adapter from standard Tamiya to a pair of alligator clip.

 

Smart Charger Specification

  • FOR 6V-12V NiMH/NiCD Battery Packs 5-10 Cells Packs
  • Input: AC 100-240V
  • Output: 6-12V, 1A or 2A

 

Operation Instruction

  • Connect battery pack to output connector and plug AC power source
  • Make sure battery polarity is connected correctly (Red wire is positive)
  • Charger will detect battery voltage automatically, Red LED will be on during charging
  • When battery is fully charged, current will reduce to trickle charging at 50mA, Green LED will be on
  • Battery will be charged at 1A or 2A constant current (selectable)
  • Approximate Charging time is about 1.5hrs for 3000mAh battery,1hr for 1800mAh battery
  • The charger is designed for faster charging NiCd and NiMH battery packs from 6 to 12V for RC car/Air and Air soft gun
  • Don't charge battery packs with voltage less than 6V or greater than 12V and capacity smaller than 1000mAh or larger than 5000mAh
  • Battery pack must be made by high drain current cell
  • Please contact your seller for instruction. Mfg is not responsible for any damage and consequent damage by Misuse.

 

Caution

  • The charger is designed for indoor use only. Don't leave the charger unattended during charging.
  • The Charger should be positioned horizontally and work in well ventilated condition, avoid water and keep away from flammable explosive goods.
  • Don't cover the charger when charging, ambient temperature shall not be more than 40oC
  • Don't touch the plug.
  • Don't leave the batteries and chargers on wood surface or carpet.
  • Cut off the power supply before connect or disconnect the charger with batteries.
  • Don't try to disassemble the charger; High voltage inside!


UPC: 844949001601 

Download product manual here.

Write a review

Your Name:


Your Review:
Note:

Rating:  Bad             Good

Enter the code in the box below: